Integrated Type Keyless Drill Chucks INT-8,13,16-SERIES 直柄R8,MT,NT,BT 連體鑽帽心軸台湾鹰牌VERTEX机具系列_

ORDER NO.	Clamping Capacity mm/inch	Female Taper DIN or jacobs	STD	OUTER Ø/mm	B	A	WEIGHT	CODE NO.	Inquriy

INT-8-MT-2	0-8mm 0-5/16" inch	MT-2		35	140	148	0.8	3301-030	Inquriy

INT-8-JC-20	0-8 0-5/16"	JC-20		35	124	132	0.8	3301-031	Inquriy

INT-8-BT30	0.5-8 1/64"-1/8"	BT30		35			1	3301-070	Inquriy

INT-8-BT40	0.5-8 1/64"-1/8"	BT40		51.5			1.5	3301-072	Inquriy

INT-8-NT30	0.5-8 1/64"-1/8"	NT30		51.5			0.8	3301-080	Inquriy

INT-8-NT40	0.5-8 1/64"-1/8"	NT40		51.5			1.3	3301-081	Inquriy

INT-13-R8	1-13 0-1/2"	R8		51.5	183	175	1.5	3301-032	Inquriy

INT-13-MT2	1-13 0-1/2"	MT-2		51.5	184	172	1.3	3301-082	Inquriy

INT-13-MT3	1-13 0-1/2"	MT-3		51.5	182	194	1.4	3301-033	Inquriy

INT-13-MT4	1-13 0-1/2"	MT-4		51.5	182	194	1.8	3301-034	Inquriy

INT-13-JC-20	1-13 0-1/2"	JC-20		51.5	138	150	1.4	3301-035	Inquriy

INT-13-JC-25	1-13 0-1/2"	JC-25		51.5	138	150	1.6	3301-036	Inquriy

INT-13-JC-32	1-13 0-1/2"	JC-32		51.5	138	150	1.8	3301-037	Inquriy

INT-13-NT30	1-13 0-1/2"	NT-30		51.5	138	150	1.4	3301-038	Inquriy

INT-13-NT40	1-13 0-1/2"	NT-40	DIN2080	51.5	98	109	1.8	3301-039	Inquriy

INT-13-BT30	0.5-13 1/64"-1/2"	BT30		51.5			1.4	3301-071	Inquriy

INT-13-BT40	1-13 0-1/2"	BT-40	ISO	51.5	98	109	2	3301-040	Inquriy

INT-13-BT50	1-13 0-1/2"	BT-50	ISO	51.5	109	120	4.7	3301-041	Inquriy

INT-13-NT50	1-13 0-1/2"	NT-50		51.5			4.3	3301-059	Inquriy

INT-16-R8	3-16 1/8"-5/8"	R8		58	188	202	1.9	3301-042	Inquriy

INT-16-MT3	3-16 1/8"-5/8"	MT3		58	188	202	1.9	3301-043	Inquriy

INT-16-MT4	3-16 1/8"-5/8"	MT4		58	188	202	2	3301-044	Inquriy

INT-16-JC-20	3-16 1/8"-5/8"	JC-20		58	140	155	1.8	3301-045	Inquriy

INT-16-JC-25	3-16 1/8"-5/8"	JC-25		58	150	165	1.7	3301-046	Inquriy

INT-16-JC-32	3-16 1/8"-5/8"	JC-32		58	150	165	2.2	3301-047	Inquriy

INT-16-NT40	3-16 1/8"-5/8"	NT40	ISO	58	116	130	2.6	3301-049	Inquriy

INT-16-BT40	3-16 1/8"-5/8"	BT40	ISO	58	116	130	2.5	3301-050	Inquriy

INT-16-BT50	3-16 1/8"-5/8"	BT50		58	126	140	5	3301-051	Inquriy

INT-16-NT50	3-16 1/8"-5/8"	NT50		58			4.5	3301-056	Inquriy

The main-shafts is of integrated type, which is much more superior than the traditional design.

The major features are as follows:

1. Extremely rigid construction.

2. The accumulative tolerances can be reduced to a minimum, since the traditional mechanism requiring an AROBOR to connect the Drill Chucks which will generate the accumulative tolerances.

The Integrated type Keyless Drill Chuck is designed to solve this problem totally.

3. Prevent the Drill Chucks from falling out.

4. Extremely safe in operation.